Vibracoustic
DE
DE

Light Vehicle Products

Light Vehicle Products

We partner with all major light vehicle manufacturers in identifying and solving current and future Noise, Vibration and Harshness (NVH) challenges. Our products reduce noise and vibrations originating from the engine, motor and drive train, as well as from road surfaces transmitted into the chassis.

Our power train portfolio offers engine, motor and transmission mounts, drive shaft dampers, cooler and exhaust mounts, center bearing supports, torsional vibration dampers and pulleys. Our chassis portfolio covers air springs, chassis, subframe and top mounts, bushings, microcellular urethane components, and various isolators and dampers. All products contribute to a smooth, quiet and safe driving experience.

MCU Body Mounts

Locate and isolate the vehicle’s body from the frame, while improving the vehicle comfort and handling qualities

MCU Jounce Bumpers

Enable ride tuning, absorb energy from irregular road events, and support vehicle handling requirements

MCU Top Mounts

Isolate road noise and more effectively react shock loads with high amplitude damping and a long linear rate response

MCU Spring Aids

Absorb energy from road events and support vehicle handling with linear response characteristics

MCU Spring Isolators

Support vehicle weight, isolate rolling noise, and provide even loading of the spring

Air Supply Unit Bracket

The air supply units (ASUs) bracket is a tunable solution that improves NVH performance through radial and axial damping. It provides reduced weight and complexity and reduces the resonance caused by the compressor excitations.

Elastic Ring Gear

Integrated solution to minimize any electric drive unit (EDU) excitations transmitted through the gearbox housing, improving EV occupant comfort.

Stator Isolator

Vibracoustic’s Stator Isolator provides a comprehensive solution to torque ripple effects in e-motors, reducing NVH-related issues and enhancing driver comfort.

Encapsulated eCompressor Bracket

Minimizing NVH disturbances with exceptional isolation, while also improving eCompressor efficiency.

Chassis Bushing for EVs

Designed to improve the dynamics, durability, noise management in BEVs with optimized design and material.

Vacuum Pump Decoupling

Decoupling systems for auxiliary components like coolers, pumps and compressors eliminate unwanted noises.

Chassis Bushings

Chassis mounts control vibrations transmitted from the road surface into the chassis, reduce unwanted vibrations and improve handling and safety.

Modular Motor Mount Bracket with TPE Bushing

Lightweight solution with thermoplastic elastomer (TPE) bushing and integrated damper mass – offers double isolation and improved efficiency.

Battery Pack Isolation

The battery pack isolation system for body-on-frame vehicles like pick-ups, off-road vehicles, large SUVs and light commercial vehicles, protects the battery pack from unwanted loads, vibrations, and torsional forces

Lightweight Front Axle Plastic Top Mounts

Reduce weight and provide high frequency isolation

Active Hydro Motor Mounts

Neutralize incoming vibrations and reduce noise by up to 20dB

Cooler Mounting Systems

Isolate the cooling subsystems and avoid unwanted vibrations

Steering Dampers

Mitigate driver disturbance and fatigue while improving comfort.

eCompressor Decoupling

The decoupling system for eCompressors solves many of the NVH challenges in balancing thermal management with excessive noise and vibration from highly loaded eCompressors.

Passive Switchable Hydro Motor Mount

Adapts its damping performance based on the excitations coming from the engine without any external electronic or hydraulic trigger.

Quiettype Motor Mounts

Reduce the noise of electric motors across a broad and configurable frequency range

Overrunning Damper Isolator Pulleys

Combine a damper isolator pulley with a one-way-clutch feature

Sprocket Dampers

Significantly reduce the noise and vibration amplitudes of the chain drive

Vulcanized Torsional Vibration Dampers

Designed for high loads and high damping, increased motor life, and reduced noise and vibrations

Fluid Torsional Vibration Dampers

Designed for when loads, damping and thermal load capacity are high

Steering Column Bushings

Isolate unwanted steering wheel vibrations and provide progressive damping

Gearbox Mounts

Eliminate gearbox whine, generate weight and cost savings, and improve durability

Switchable Hydro Motor Mounts

Isolate excitations at low amplitudes while dampening those at high amplitudes

Hydro Motor Mounts

Combine acoustic isolation with balanced damping performance

Lightweight Plastic Motor Mounts

Enable significant weight savings without compromising performance

Damper Isolator Pulleys

Combine torsional vibration damping and an isolating function for the belt drive system

Pressed Torsional Vibration Dampers

Enable lightweight crankshaft design and cost-efficient noise radiation reduction

Brake Tuned Absorbers

Dampen low frequency moaning and squealing brake noises

Seat Dampers

Reduce seat vibrations with opposing inertial forces

Exhaust Mounts

Secure and support the exhaust position and reduce structure-borne noise and vibrations

Other Mass Dampers

Reduce vibrations with opposing inertial forces and highly flexible design

Center Bearing Supports

Offer perfect isolation and damp excessive drive shaft tumbling and orbiting

Center Sleeves

Align the gear box to the drive shaft and allow cardanic angles using an elastomer track

Drive Shaft Dampers

Reduce or eliminate torsional vibrations and natural frequencies at the drive shaft

Air Springs with Axial Sleeves

Provide optimal comfort at very low friction levels

Spherical Center Sleeves

Align the gear box to the drive shaft and allow high cardanic angles using a spherical elastomer track

Switchable Three-Chamber Air Springs

Resolve the conflicting objectives of comfort and good driving dynamics

NRG-Disc Flexible Rubber Couplings

Reduce effects of unwanted torsional vibrations and high frequency noises, offer a strong, compact and cost-effective drive shaft coupling

Air Springs with Cross-Ply Bellows

Comfort optimized with superior robustness

Torque Rods

Prevent vibration and noise transfer, and restrict motor roll

Air Springs with ZAX Bellows

Combine good torsion decoupling with dimensional stability

DualRubber Bushings

Simultaneously provide low damping vertically and high damping horizontally

Hydro Bushings

Modify dynamic properties with hydraulic damping function

Subframe Mounts

Isolate high-frequency vibrations and noises from the road and from auxiliary devices

Top Mounts

Minimize road surface excitations and support vehicle stability and road holding